Neets Control - QueBec Pro
Description
Neets Control - QueBec Pro is designed to create an intelligent AV-control environment in small and medium-sized meeting rooms or learning spaces with interactive displays or LCDs.
The auto-switching between sources makes it easy for every user to connect instantly. The QueBeco Pro can switch automatically between all HDMI/ VGA signals.
QueBec Pro detects signals from video sources and automatically initiates room functions.
-
Automatic Sensing AV control system
Senses the video signal and automatically starts up room functions -
Auto Source Selection
Latest active source is automatically selected and displayed -
HDMI Sensing and Repeater
HDMI sense works with all products and the repeater enables longer cable drive -
VGA Video Detection
Enables Hsync detection of video signals -
Built–in 3-Port HDMI switch
Connect 3 HDMI input sources and switch between upon signal present -
Fast installation
Euroblock connectors and PoE makes installation fast and efficient -
2 Bi-directional RS-232 or 4 IR port
Used for sending commands to projectors or other AV devices using serial or infrared communication -
2 General Purpose I/O ports
Used for input/output control of relays, switches and sensors -
1 Ethernet port
Used for controlling 2 LAN devices and extension devices -
PoE powered
Power the QueBec Pro with a compliant PoE power supply or switch (PoE injector not included)
Link to compliant PoE Injector
RS-232 / IR port:
Ports: 2 x bidirectional
Baud rate 1200 – 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block
Input / Output:
Ports 2 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 3 pin screw block
Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block
VGA Loop through w. signal sensing:
Signal channel VGA loop through
Signal sensing Vertical sync signal
Specification QWXGA – 2048x1152
Connector DSUB DE-15
Ports: 2 x bidirectional
Baud rate 1200 – 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block
Input / Output:
Ports 2 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 3 pin screw block
Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block
VGA Loop through w. signal sensing:
Signal channel VGA loop through
Signal sensing Vertical sync signal
Specification QWXGA – 2048x1152
Connector DSUB DE-15
HDMI switch:
3 in 1 out HDMI switch w. signal sensing:
Signal sensing type: TMDS clock.
Specification HDMI 1.3
Connector HDMI Type A
HDCP support:
No
Video support:
HDTV formats up to
1080p 12bit Deep Color
DVI RGB graphics up to
1600 x 1200 @ 60Hz
Audio support:
Full audio input and
stereo output support
HDMI Compatible audio
interface
3 in 1 out HDMI switch w. signal sensing:
Signal sensing type: TMDS clock.
Specification HDMI 1.3
Connector HDMI Type A
HDCP support:
No
Video support:
HDTV formats up to
1080p 12bit Deep Color
DVI RGB graphics up to
1600 x 1200 @ 60Hz
Audio support:
Full audio input and
stereo output support
HDMI Compatible audio
interface
Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
PoE – Power over Ethernet:
QueBec Pro is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices
Note: PoE Injector not included.
Link to compliant PoE Injector
Dimensions:
Width: 218 mm / 8.58 inch.
Depth: 70 mm / 2.76 inch.
Height: 37 mm / 1.46 inch.
General: Weight: 0.5 kg
Storage temperature: -20 °C to 50 °C
Storage moisture: Non condensing
Operation temperature: 0 °C to 30 °C
Operation moisture: Non condensing
Compliancy:
Approval: CE, FCC (part 15, class A)
IEC/EN 61000-6-1
IEC/EN 61000-6-2
Product item number:
310-0020: Neets Control – QueBec Pro
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
PoE – Power over Ethernet:
QueBec Pro is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices
Note: PoE Injector not included.
Link to compliant PoE Injector
Dimensions:
Width: 218 mm / 8.58 inch.
Depth: 70 mm / 2.76 inch.
Height: 37 mm / 1.46 inch.
General: Weight: 0.5 kg
Storage temperature: -20 °C to 50 °C
Storage moisture: Non condensing
Operation temperature: 0 °C to 30 °C
Operation moisture: Non condensing
Compliancy:
Approval: CE, FCC (part 15, class A)
IEC/EN 61000-6-1
IEC/EN 61000-6-2
Product item number:
310-0020: Neets Control – QueBec Pro
-
Find all of the relevant information in our Knowledge Base!
Visit Knowledge Base