10" Touch and TanGo bundle
Command the entire room from your fingertips
When combining 10’’ of screen real-estate with an intuitive interface you get quick and easy access to all of your AV equipment. The large size makes it immediately recognizable when entering the room and is designed for convenient placement on you conference table, as well as a great fit for wall mounting.
Perfect for video conferencing
The 10" panel is perfect for online connected rooms such as meeting rooms or classrooms. Making control of camera pan/tilt/zoom, selecting to record the meeting plus adjusting levels on speaker outputs and microphone inputs is all controlled with ease.
Go online with a press of a button
It is easy to create large and complicated user interfaces but with Neets Touch panels it is possible to create a one button solution to get those dreaded online meetings in the air. The automation lets you turn on the TV, the sound bar setting the camera in the correct position for you exact needs with just one press of a button.
A strong system powers the experience
TanGo is one of our most powerful touch panel controller enabling you to gather all of your AV equipment into one single hub.
Intuitive interfaces
We put an end to cluttered interfaces with our different graphical templates - our system that powers the touch panels. The templates, such as Bolzano and Arona gives you the possibility to choose the specific buttons and functions that suits your room.
Easy day to day use of complex rooms or lecture
This bundle makes presenting easy even in well-equipped rooms or lecture halls with window blinds, screens, lights, audio etc.
-
The center of everything in the room
TanGo and Neets Touch panels are a fantastic match and makes users able to control just about everything electronic device in the room, AV equipment, Lighting, Heating and Curtains, just to name a few. -
Perfect for video conferencing
The 10" panel is perfect for online connected rooms such as meeting rooms or classrooms. Making control of camera pan/tilt/zoom and selecting to record the meeting plus levels on speakers outputs and microphone inputs a breeze to control. -
Wall or table mounted
Fits standard 1-gang DK, EU or US back box. Wall bracket included. Table mount is an accessory -
PoE Powered
Power the TanGo through a PoE injector or switch and take the power from the PoE output on the TanGo to feed the Touch Panel, thus only occupying one LAN port.
(PoE injector not included)
Link to compliant PoE Injector
Bundle product no: 313-1006
Neets 10" Touch Panel
Part no: 313-0003
General
1280x800 resolution IPS panel with full viewing angle (brightness 350 nits).
150 Dpi
PoE support
Power over Ethernet (PoE), IEEE802.3af, 48V
Class 3 (up to 13 watt)
Note: PoE Injector not included.
Sensors
Proximity sensor – For automatic display activation.
Ambient Light sensor – For automatic backlight dimming.
Touch Screen
Scratch resistant glass-on-glass touch screen.
Connections
RJ45 with POE – For both Power and Ethernet communication.
Micro USB (for FW upgrade only).
Design Templates
Use graphical templates or completely customize the GUI in Project Designer.
Wall-mount
Fits standard 1-gang DK, EU or US back box - wall bracket included. Table mount is an accessory.
Neets 10" Touch Panel
Part no: 313-0003
General
1280x800 resolution IPS panel with full viewing angle (brightness 350 nits).
150 Dpi
PoE support
Power over Ethernet (PoE), IEEE802.3af, 48V
Class 3 (up to 13 watt)
Note: PoE Injector not included.
Sensors
Proximity sensor – For automatic display activation.
Ambient Light sensor – For automatic backlight dimming.
Touch Screen
Scratch resistant glass-on-glass touch screen.
Connections
RJ45 with POE – For both Power and Ethernet communication.
Micro USB (for FW upgrade only).
Design Templates
Use graphical templates or completely customize the GUI in Project Designer.
Wall-mount
Fits standard 1-gang DK, EU or US back box - wall bracket included. Table mount is an accessory.
Control System compatibility
Compatible with Neets Control Systems SieRRa II, TanGo, AlFa II, DelTa and LiMa.
Neets Control - TanGo
Part no: 310-0305
General:
Width: 218 mm
Height: 37 mm
Depth: 70 mm
Width: 8,58 inches
Height: 2,76 inches
Depth: 1,46 inches
Weight: 0.5 kg.
Shipping weight: 1.0 kg.
Shipping dimension: 282 mm / 188 mm /
(W/D/H) 55 mm
Storage temperature -20 °C to 50 °C
Storage moisture Non-condensing
Operation temperature 0 °C to 30 °C
Operation moisture Non-condensing
RS-232 / IR port:
Ports: 3 x bidirectional and 2 x unidirectional
Baud rate 1200 – 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block
Compatible with Neets Control Systems SieRRa II, TanGo, AlFa II, DelTa and LiMa.
Neets Control - TanGo
Part no: 310-0305
General:
Width: 218 mm
Height: 37 mm
Depth: 70 mm
Width: 8,58 inches
Height: 2,76 inches
Depth: 1,46 inches
Weight: 0.5 kg.
Shipping weight: 1.0 kg.
Shipping dimension: 282 mm / 188 mm /
(W/D/H) 55 mm
Storage temperature -20 °C to 50 °C
Storage moisture Non-condensing
Operation temperature 0 °C to 30 °C
Operation moisture Non-condensing
RS-232 / IR port:
Ports: 3 x bidirectional and 2 x unidirectional
Baud rate 1200 – 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block
IR learn:
IR Learn frequency 1 KHz to 150 KHz
Input / Output:
Ports 8 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 4 pin screw block
Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block
Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
PoE – Power over Ethernet:
TanGo is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices
Note: PoE Injector not included. Use PoE Injector (Product Item number: 302-000508)
Approvals:
IEC/EN 61000-6-1
IEC/EN 61000-6-2
FCC Part 15, Class A
CE
IR Learn frequency 1 KHz to 150 KHz
Input / Output:
Ports 8 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 4 pin screw block
Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block
Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
PoE – Power over Ethernet:
TanGo is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices
Note: PoE Injector not included. Use PoE Injector (Product Item number: 302-000508)
Approvals:
IEC/EN 61000-6-1
IEC/EN 61000-6-2
FCC Part 15, Class A
CE
Software
Please remember to login for access to the latest release of Neets Project Designer. If you do not have a Neets account, please fill out the form "Get Accesss".
Firmware
-Ver. 3.23.1 (18-03-2019)
New Features:
- IR working support on Uniform Control System
- UDP issues fixed
- AMP 2:25, OFFDelay support upto 4 hours
- Click Share more than 3 buttons fix
- Quebec Pro HDMI changes not notified to script fixed
- Echo Plus Memory Calculations fix
+Ver. 3.23.0 (16-01-2019)
+Ver. 3.22.2 (23-11-2018)
+Ver. 3.22.1 (18-10-2018)
+Ver. 3.22.0 (31-08-2018)
+Ver. 3.21.0 (01-06-2018)
+Ver. 3.20.1 (21-03-2018)
+Ver. 3.20.0 (23-02-2018)
+Ver. 3.12.1 (06-12-2017)
+Ver. 3.12.0 (16-10-2017)
+Ver. 3.11.3 (14-09-2017)
+Ver. 3.11.2 (27-06-2017)
+Ver. 3.11.1 (09-06-2017)
+Ver. 3.11.0 (28-04-2017)
+Ver. 3.10.0 (05-12-2016)
+Ver. 3.9.0 (31-10-2016)
+Ver. 3.8.5 (02-09-2016)
+Ver. 3.8.4 (17-06-2016)
+Ver. 3.8.3 (03-06-2016)
+Ver. 3.8.2 (01-06-2016)
+Ver. 3.8.1 (10-05-2016)
+Ver. 3.8.0 (27-04-2016)
+Ver. 3.7.0 (11-01-2016)
+Ver. 3.6.7 (06-11-2015)
+Ver. 3.6.6 (02-11-2015)
+Ver. 3.6.5 (28-10-2015)
+Ver. 3.6.4 (13-10-2015)
+Ver. 3.6.3 (13-08-2015)
+Ver. 3.6.2 (29-06-2015)
+Ver. 3.6.1 (29-06-2015)
+Ver. 3.6.0 (21-05-2015)
+Ver. 3.5.2 (20-04-2015)
+Ver. 3.5.1 (25-03-2015)
+Ver. 3.5.0 (16-03-2015)
+Ver. 3.4.4 (04-02-2015)
+Ver. 3.4.3 (04-02-2015)
+Ver. 3.4.2 (26-01-2015)
+Ver. 3.4.1 (13-01-2015)
+Ver. 3.4.0 (15-12-2014)
+Ver. 3.3.2 (14-11-2014)
+Ver. 3.3.1 (04-11-2014)
+Ver. 3.2.4 (17-09-2014)
+Ver. 3.2.3 (02-09-2014)
+Ver. 3.2.2 (17-07-2014)
+Ver. 3.2.1 (27-06-2014)
+Ver. 3.2.0 (20-06-2014)
+Ver. 3.1.0 (27-02-2014)
+Ver. 3.0.2 (16-01-2014)
+Ver. 3.0.1 (10-12-2013)
-
Find all the relevant information on our Knowledge Base!
Visit Touch Panel section of the Neets Knowledge Base
Visit Control System section of the Neets Knowledge Base
A complete videoconferencing solution
Sound Bar SB - 1
Bring your messages to life
- Professional quality audio
- Voice enhancing technology
- Compatible with every Neets control system
- Available in 5 vibrant colors
- Can be placed on a stand or wall mounted
Audio Preamplifier
Boost audio in large-scale installations
- 2 channel amplification
- With ICEpower® Class D module from Bang & Olufsen
- 19" rack mounting
PIR sensor
Device activation with motion sensors
- Detecs movement in the room
- Turn devices on and off automatically
- Compatible with every Neets control system
- Can also be used for alarm systems
